Maintenance Operating instructions VS12 /C /F /F-P /W
8 - 18 6.080.98.5.10.13 en
8
Preparing the machine for operation. See chapter 8.5.
WARNING Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
–
Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
8.7 Care of machine, servicing, maintenance
The entire machine must be thoroughly cleaned based on usage, but at least twice a
day.
Re-sharpen blade if necessary.
When necessary, clean or exchange sharpening stones. Caution! Left-handed
thread!
To Next Page
Loading...
