Operating instructions VS12 /C /F /F-P /W Maintenance
6.080.98.5.10.13 en 8 - 19
8
Fig. 62: Maintenance
Slightly lubricate product holder guide
shaft once a week with oil from the ac-
cessories kit.
At an annular gap of 6 mm between the blade and the guard ring, the
sharpener no longer has a sharpening effect and the blade has to be re-
placed.
WARNING Changing the blade!
Severe injuries and damage to property.
–
For safety reasons, the blade may only be changed by Bizerba
customer service.
– Wear cut-proof gloves and shoes with toe caps.