Installation Operating instructions VS12 /C /F /F-P /W
4 - 2 6.080.98.5.10.13 en
4
4.2.2 Electrical connection
Information on the rating plate
Bizerba logo BIZERBA
Machine type VS12 /F /F-P /W /C
Machine description Slicer Ee
Machine number ...
Production code X-..
Protection class IP 33
Electrical data see specification plate
Manufacturer's address Bizerba GmbH & Co.KG
D-72336 Balingen
MADE IN GERMANY
Check before mains connection
Before you connect the machine, check the electric data on the rating
plate with the mains data about the power supply.
CAUTION Incorrect supply voltage!
Damage of electric components, fire hazard.
–
Do not connect the machine to the power supply if the power sup-
ply data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
Installation of power supply provided by customer
Installation of the power supply to connect our machines must be carried out in accord-
ance with country-specific regulations and the terms and conditions derived thereof. These
essentially include the recommendations of at least one of the following commissions:
–
International Electro-technical Commission (IEC)
– European Committee for Electro-technical Standardization (CENELEC)
The machine has been built according to Protection Type I and has to be connected to the
protective conductor.
To Next Page
Loading...
Need help?
General
