Bizerba VS12F - Slicing Product with the VS12 F

Operating instructions VS12 /C /F /F-P /W Operation
6.080.98.5.10.13 en 6 - 3
6
CAUTION There are spikes on the product holder!
Risk of injury.
–
Use handle when working with product holder.
Fig. 25: Inserting the product
Move carriage towards operator.
Using the handle, move product holder
away from blade and tilt it up.
Fig. 26: Inserting the product
Place product on carriage, position on
real wall and push towards gauge plate.
Swivel product holder with handle, place
on top of product and slightly press in
spikes
Set slice thickness at knob.
Switch on machine.