Operating instructions VS12 /C /F /F-P /W Maintenance
6.080.98.5.10.13 en 8 - 3
8
Product fixation device VS12, VS12W (option)
Fig. 36: Product fixation device
Pull the product holder fixation as far as
it will go towards the operator and pull
off the guide shaft, moving it to the right.
Product feed carriage VS12F
Fig. 37: Product feed carriage VS12F
Lift up feeding carriage where the prod-
uct holder shaft is located and remove in
upward direction.
Product feed carriage VS12F-P
Fig. 38: Product feed carriage VS12F-P
In order to clean carriage, pull away
product feed carriage from blade until
stop. The product feed carriage can only
be lifted up in this position.
To Next Page
Loading...
