1
1 General Information
1.1 Product Overview
The 9200B Series power supplies are multi-range single-output DC power supplies capable of
replacing several supplies on the bench. Unlike conventional supplies with fixed output ratings,
these multi-range power supplies automatically re-calculate voltage and current limits for each
setting, providing full output power in any Volt/Amp combination within the rated voltage and
current limits. Each model in the 9200B Series comes standard with USB and RS-232
communication interfaces for remote control.
Features:
• High visibility VFD display
• Easy-to-use interface with numerical keypad, cursors, and rotary control knobs
• High programming and readback resolution
• Low ripple and noise
• Intelligent fan control
• List mode programming
• Standard USB and RS-232 interfaces
• Software for remote control
• SCPI-compliant command set
• Output timer function
• Overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature
protection (OTP)
1.2 Package Contents
Please inspect the instrument mechanically and electrically upon receiving it. Unpack all items
from the shipping carton, and check for any obvious signs of physical damage that may have
occurred during transportation. Report any damage to the shipping agent immediately. Save the
original packing carton for possible future reshipment. Every power supply is shipped with the
following contents:
• 1 x 9201B, 9202B, 9205B, or 9206B Power Supply
• 1 x User Manual
• 1 x AC Power Cord
• 1 x Certificate of Calibration
Verify that all items above are included in the shipping container. If anything is missing, please
contact B&K Precision.
To Next Page
Loading...
Need help?
General
