Operating Instructions 500 E Global
General
2
3.1 Introduction
Blastrac wants to thank you for your decision to employ the blast-
cleaning machine 500 E Global for the treatment of horizontal
surfaces.
The machine has a closed abrasive circuit with dust separation. This
comprehensively avoids damaging the environment and endangering
the operating staff.
The 500 E Global is designed to remove coatings, non-skid, epoxy,
bitumen and asphalt on different types of horizontal surfaces.
3.2 Operating instructions
This manual has been written to support the operating personnel on
learning the functioning of the machine and to guarantee optimum
operation and maintenance.
Therefore it is important that all persons operating and
maintaining the machine read this manual carefully and
understand it fully.
The supplied machine has been manufactured for being employed in
the user’s country. All descriptions and notes have been formulated in
the language of the user’s country or in English in accordance with
the statutory regulations, or shown as pictograms. If the customer
deploys personnel with little knowledge of the language of the user’s
country, appropriate instruction and training must be provided.
Before using the machine personnel must be familiar with how
to operate the machine, with all important components, with the
method of working and with its dimensions.
Blastrac BV offers a course on the use of the machine in order to
make the operating and maintenance personnel familiar with all
elements of the blast-cleaning machine.
To Next Page
Loading...
