Operating Instructions 500 E Global
Operation
4
6.3 Recommended blast paths
Position the filter unit near to a power supply connection.
Place the blast cleaning machine near to the filter unit and spread out
the hose as shown in fig. 6.1.
Work with the blast cleaning machine, with the hose spread out in the
opposite direction, repeating the process away from the filter unit.
Fig. 6.1
1 Filter unit
2 Dust hose
3 Blast cleaning machine
Travel stepwise over the work area considering the service length of the
dust hose.
Finish the blast cleaning process by blasting the area where the filter
unit originally stood.
To Next Page
Loading...
