500 E Global Operating Instructions
General
3
Initial commissioning of the machine must be carried out very
carefully. The machine operator must fully understand the sequence
of commissioning of the individual parts and their functioning.
ll persons in the proximity of the machine in operation must wear
ear protectors, safety glasses with lateral protection and safety
shoes. The machine operator must wear close-fitting protective
clothing.
3.3 Connections
Machine Voltage Connection type
500 E Global 400-480V 60Hz 63A
3.4 Care and maintenance
Special attendance and regular maintenance of the machine and its
parts are imperative for functioning and safety.
In order to prevent unnecessary downtimes it is recommended to
keep original spare and wear parts on stock as listed in the
maintenance box.
A list of contents of the maintenance box is provided in Chapter 10 to
enable the above-mentioned work to be carried out quickly.
WARNING: BLASTRAC machines build for the American market
are especially build to run on 440-480V 60Hz. If the machines are
operating on a Voltage or Hz lower than 440V and 60Hz, this will
damage the electric components.
To Next Page
Loading...
