Bluebird VF550 - Wireless Connectivity; Static IP Address and Wi-Fi Preferences

4 Getting Started
15
4.4.4 Setting the Date and Time
You are only required to set the time zone or set the date and time if the wireless LAN does not support
Network Time Protocol (NTP).
To set the date and time:
1
Go to Settings.
2
Touch System > Date & time.
3
Touch Automatic date & time to disable automatic date and time synchronization.
4
Touch Set date.
5
In the calendar, set today’s date.
6
Touch OK.
7
Touch Set time.
8
Touch the green circle, drag to the current hour and then release.
9
Touch the green circle, drag to the current minute and then release.
10
Touch AM or PM.
11
Touch OK.
12
Touch Use 24-hour format.
13
Touch the home button ( ).
4.5 Display Settings
Use Display settings to change the screen brightness, enable night light, Wallpaper to change the
background image, Auto-rotate screen to enable screen rotation, Screen timeout to set sleep time, and Font
size to change the font size.
4.5.1 Setting the Screen Brightness
To manually set the screen brightness using the touchscreen:
1
Swipe down twice with two fingers from the Status bar to open the Quick Access panel.
2
Slide the icon to adjust the screen brightness level.
To let the device automatically adjust the screen brightness using the built-in light sensor:
1
Go to Settings.
2
Touch Display.
3
If disabled, touch Adaptive brightness to automatically adjust the brightness.
By default, Adaptive brightness is enabled. Toggle the switch to disable.
4
Touch the home button ( ).