5 Using the Device
41
5.26 Transferring Files with a Host Computer via USB
Connect the device to a host computer using a USB cable or a USB cradle to transfer files between the
device and the host computer.
When connecting the device to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files.
5.26.1 Transferring Files
Use Transfer files to copy files between the device (internal memory or microSD card) and the host
computer.
1
Connect a USB cable to the device or place the device into a USB cradle.
2
Pull down the Notification panel and touch Charging this device via USB.
By default, No data transfer is selected.
3
Touch File Transfer.
After you change the setting to File Transfer, and then disconnect the USB cable, the setting reverts
back to No data transfer. If the USB cable is reconnected, select File Transfer again.
4
On the host computer, open a file explorer application.
5
Locate the device as a portable device.
6
Open the SD card or the Internal storage folder.
7
Copy files to and from the device or delete files as required.
5.27 Transferring Photos
To transfer photos using Photo Transfer Protocol (PTP):
Use PTP to copy photos from either the microSD card or internal memory to the host computer.
1
Connect USB cable to the device or place the device into a USB cradle. See Accessories for setup
information.
2
Pull down the Notification panel and touch Charging this device via USB.
3
Touch PTP.
4
On the host computer, open a file explorer application.
5
Open the SD card or the Internal storage folder.
6
Copy or delete photos as required.
To Next Page
Loading...