Bluebird VF550 - WLAN Configuration; Configuring a Secure Wi-Fi Network

9 Wireless
83
4
Touch the name of the network.
5
In the dialog box, touch FORGET.
6
Touch the home button ( ).
9.10 WLAN Configuration
This section provides information on configuring Wi-Fi settings.
9.10.1 Configuring a Secure Wi-Fi Network
To set up a Wi-Fi network:
1
Go to Settings.
2
Touch Network & Internet > Wi-Fi.
3
Slide the switch to the ON position.
4
The device searches for WLANs in the area and lists them on the screen.
5
Scroll through the list and select the desired WLAN network.
6
Touch the desired network. If the network security is Open, the device automatically connects to the
network. For all other network security a dialog box appears.
7
If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch
Connect.
8
If the network security is 802.1x EAP:
• Touch the EAP method drop-down list and select PEAP, TLS, TTLS, PWD, or LEAP.
• Touch the Phase 2 authentication drop-down list and select an authentication method.
• If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates
are installed using the Security settings.
• If required, touch User certificate and select a user certificate. Note: User certificates are installed
using the Location & security settings.
• If required, in the Identity text box, enter the username credentials.
• If desired, in the Anonymous identity text box, enter an anonymous identity username.
• If required, in the Password text box, enter the password for then given identity.
By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server for setting connection to a proxy server and see Configuring the Device to Use a Static IP
Address for setting the device to use a static IP address.
9
Touch Connect.
10
Touch the home button ( ).