8 Data Capture
72
8.6 Scanning with Internal Camera
To read a barcode, a scan-enabled app is required. The device contains the CameraBarcodeTest app that
allows the user to enable the imager, decode the barcode data, and display the barcode content.
The camera barcode function requires separate license authentication and it is only available on
authenticated terminal.
To scan with the internal camera:
1
Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
2
Point the camera exit window on the back of the device at a barcode.
When Picklist mode is enabled, move the device until the bar code is centered.
3
Move the device until the barcode is visible on the screen.
4
The captured data appears in the text field.
To Next Page
Loading...
