How to reset all settings to factory defaults on bluelab Pro Wi-Fi?
To reset all settings to factory defaults on your Bluelab Controller, hold the brightness button down and apply power. Release the brightness button when “FAC dEF” appears.
Lists the key features and capabilities of the Bluelab Pro Controller Wi-Fi.
Details all the components and accessories included with the Bluelab Pro Controller.
Explains the fundamental operating principles and functions of the Bluelab Pro Controller.
Identifies and describes the various connection ports on the Bluelab Pro Controller.
Step-by-step instructions for connecting the pH, conductivity, and temperature probes.
Guides the user through the initial power-on procedure for the controller.
Details the display screen, buttons, and indicators on the Bluelab Pro Controller.
Describes the 'Monitor only' mode of operation for the controller.
Explains how to change measurement units for conductivity and temperature.
Details how to set the dosing direction for measurements.
Guides on setting required values and alarm levels for measurements.
Explains how to set the dosing duration (on time) for measurements.
Details how to set the delay time between doses (off time).
Outlines the process for calibrating the pH and conductivity probes.
Explains how to use the controller in 'Control' mode for automated dosing.
Instructions on how to adjust the brightness level of the controller's display.
Guidance on selecting a suitable location and securely mounting the Bluelab Pro Controller.
Instructions for correctly positioning the pH, conductivity, and temperature probes in the solution.
How to manually dose specific parameters like conductivity, temperature, or pH.
Details on connecting Bluelab dosers and other systems to the controller.
A page for noting down system configuration parameters and set values.
Instructions for connecting the alarm and external lockout cable to external devices.
Explains how the alarm and lockout cable enables external alarms and system interruptions.
Describes the LED indicator for external lockout and its operational meaning.
Step-by-step guide to connecting the Pro Controller to a Wi-Fi network for the first time.
Instructions for changing the Wi-Fi network connection on the controller.
How to enable or disable Wi-Fi connectivity and data transmission.
Detailed instructions for cleaning the pH probe to ensure accurate readings.
Comprehensive guide on how to calibrate the pH probe accurately.
Essential tips and warnings for maintaining the pH probe's lifespan and performance.
Proper methods for storing the pH probe to keep it hydrated and functional.
Step-by-step instructions for cleaning the conductivity probe for optimal performance.
Guidance on calibrating the conductivity probe, including pre-cleaning steps.
Common problems, their causes, and recommended solutions for the controller.
Explanation of various display codes, errors, and status messages on the controller.
Instructions for updating the controller's firmware via Wi-Fi connection.
Detailed technical data, ranges, accuracies, and environmental requirements.
Information on when and how to replace the pH probe.
Details on the available probe cleaning and maintenance kits.
Information about the Bluelab pH Probe KCI Storage Solution and its uses.
Explains the terms, coverage, and exclusions of the Bluelab limited warranty.
General| Brand | bluelab |
|---|---|
| Model | Pro Controller Wi-Fi |
| Category | Controller |
| Language | English |
To Next Page
