What to do if my Bluetti Portable Generator displays USB Upgrade Failure?
If your Bluetti Portable Generator displays a USB Upgrade Failure, turn the inverter on again. If the symptom persists, please contact the BLUETTI support team.
What to do if I see 'Grid Voltage High' on my Bluetti Audio & Video Accessories?
If the 'Grid Voltage High' error occurs occasionally on your Bluetti Audio & Video Accessories, it may indicate abnormal grid conditions, and the inverter should recover once the grid stabilizes. However, if it happens frequently, verify that the grid voltage and frequency meet the inverter's input specifications. Also, check the inverter's AC circuit breaker and connections. If the voltage and frequency are out of range, contact the BLUETTI support team.
What to do if I see 'Grid Voltage High-ARM' on my Bluetti Audio & Video Accessories?
If the 'Grid Voltage High-ARM' error occurs frequently on your Bluetti Audio & Video Accessories, verify that the grid voltage and frequency meet the inverter's input specifications. Also, check the inverter's AC circuit breaker and connections. If the voltage and frequency are beyond the specified range, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'DC Input Voltage High'?
If your Bluetti Audio & Video Accessories show a 'DC Input Voltage High' error, verify that the DC voltage is consistent with the battery specifications.
What to do if my Bluetti Audio & Video Accessories display 'PV1 Voltage High'?
If your Bluetti Audio & Video Accessories display 'PV1 Voltage High', check if the total voltage of the solar panels exceeds the limit. If it does, reduce the number of solar panels; the inverter should resume operation after calibration.
What to do if my Bluetti Audio & Video Accessories display 'PV1 Voltage Low'?
If your Bluetti Audio & Video Accessories display 'PV1 Voltage Low', check the PV setup. Solar panels may get a low voltage without proper working conditions.
What to do if my Bluetti Audio & Video Accessories display 'GFCI Failure'?
If your Bluetti Audio & Video Accessories display 'GFCI Failure', check if the AC output PE wire is grounded.
What to do if my Bluetti Audio & Video Accessories display 'Phase Sequence Error'?
If your Bluetti Audio & Video Accessories display 'Phase Sequence Error', check if the grid connection meets installation requirements.
What to do if my Bluetti Audio & Video Accessories display 'PV1 ISO Failure'?
If your Bluetti Audio & Video Accessories display 'PV1 ISO Failure', check the insulation resistor between the solar array and grounding for a short circuit.
What does 'USB Format Error' mean on my Bluetti Audio & Video Accessories and how to fix it?
If your Bluetti Audio & Video Accessories display a 'USB Format Error', ensure that the USB drive is formatted as FAT32 and has a maximum memory of 32G. Also, check if the upgrade files exist and are not expired. Download the latest upgrade files if necessary.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
To Next Page
