What to do if my Bluetti Audio & Video Accessories display 'Zero Drift Anomaly'?
If your Bluetti Audio & Video Accessories display 'Zero Drift Anomaly', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'Zero Drift Anomaly-ARM'?
If your Bluetti Audio & Video Accessories display 'Zero Drift Anomaly-ARM', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if Bluetti EP600 shows Grid Voltage High?
If the Bluetti Storage unit frequently displays a 'Grid Voltage High' error, verify that the grid voltage and frequency are within the inverter's specified input range. Also, inspect the inverter's AC circuit breaker and connections. If the voltage and frequency fall outside the acceptable range, it is recommended to contact the BLUETTI support team.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
To Next Page
