EasyManua.ls Logo

BMW Cevolution - Page 38

BMW Cevolution
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Insufficient battery charge
current
lights up red.
appears on the display.
A discharged 12V battery
can render various sys-
tems unavailable, for example the
lights, the electrical machine, or
the ABS. This can result in dan-
gerous situations.
Do not continue your journey.
The 12V battery is not charging.
Possible cause:
There is a fault in the DC/DC
transformer.
Consult an authorised
BMW Motorrad dealer.
On-board system voltage
low
appears on the display.
Possible cause:
Too many consumers switched
on.
Charge the 12V battery
( 100).
If the 12V battery no longer
charges fully:
Consult an authorised
BMW Motorrad dealer.
On-board system voltage
critical
lights up yellow.
appears on the display.
The 12V battery no longer has
enough capacity to supply all the
consumers.
Possible cause:
Too many consumers switched
on.
Charge the 12V battery
( 100).
If the 12V battery no longer
charges fully:
Consult an authorised
BMW Motorrad dealer.
Service overdue
shows yellow briefly after
the Pre-Ride-Check.
appears on the display.
Possible cause:
A necessary service has not
been carried out.
Have the service carried out as
soon as possible by an author-
ised BMW Motorrad dealer.
3
36
z
Status indicators

Table of Contents

Related product manuals