Spring preload
Adjustment
It is essential to set spring pre-
load of the rear suspension to
suit the load carried by the E-
Scooter. Increase spring pre-
load when the vehicle is heavily
loaded and reduce spring preload
accordingly when the vehicle is
lightly loaded.
Adjusting spring preload
for spring strut
Make sure the ground is level
and firm and place the E-
Scooter on its stand.
If you want to increase spring
preload, use hook wrench 1
(on-board toolkit) to turn the
adjusting ring in direction A as
indicated by the arrow.
If you want to reduce spring
preload, use hook wrench 1
(on-board toolkit) to turn the
adjusting ring in direction B as
indicated by the arrow.
Basic setting of spring
preload, rear
Spring strut with spring ten-
sion fully relieved (One-up rid-
ing without luggage)
Basic setting of spring
preload, rear
Preloaded to 4 of 7 clicks
(Two-up riding and luggage)
Brakes
Adjusting the front brake
lever
Attempting to adjust the
handbrake lever while riding
the vehicle can lead to accidents.
Do not attempt to adjust the
handbrake lever unless the E-
Scooter is at a standstill.
5
54
z
Adjustment
To Next Page
Loading...
