EasyManua.ls Logo

BMW Cevolution - Securing E-Scooter for Transporta; Tion

BMW Cevolution
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Centre stand
Switch off driving readiness.
If the ground is soft or un-
even, there is no guaran-
tee that the motorcycle will rest
firmly on the stand.
Always check that the ground
under the stand is level and
firm.
Excessive movements
could cause the centre
stand to retract, and the vehicle
would topple in consequence.
Do not lean or sit on the E-
Scooter with the centre stand
extended.
Extend the centre stand and lift
the E-Scooter on to the stand.
Securing E-Scooter for
transportation
Make sure that all components
that might come into contact
with straps used to secure the
motorcycle are adequately pro-
tected against scratching (e.g.
with masking tape).
The E-Scooter can topple
and fall on its side.
Secure E-Scooter against top-
pling; this is best done with the
support of a 2nd person.
Push the E-Scooter on to the
transportation flat and hold it in
position: do not place it on the
side stand or centre stand.
Risk of damaging compon-
ents.
Take care not to trap
components such as brake lines
or wires.
At the front, loop a strap over
the bottom fork bridge on each
side and tighten.
7
78
z
Riding

Table of Contents

Related product manuals