BOC Smootharc Multi 180 - Page 20

20
BOC Smootharc Multi 180/200 Operating manual
Turn and press centre knob
to select Spot Timer.
Press centre
knob toconrm.
Press and turn centre knob
to select Recall Setting.
Using centre knob set
SpotTimerat:
0 sec for 2T function
0.1sec for 4T function
>0.1 sec for spotwelding.
Press centre
knob toconrm.
Press and turn centre knob
to select Save Setting.
Flux cored welding
For Flux Cored welding please ensure that you have loaded the
correct self-shielded gasless wire in set up.