BOC Smootharc Multi 180 - Stick;MMA Mode Operations

21BOC Smootharc Multi 180/200 Operating manual
MIG mode for aluminium wire (spool gun)
This machine uses aluminium wire through a spool gun. Please ensure
you have installed the spool gun before welding with aluminium. Refer
to installation section of this manual. To operate, please follow same
steps as 6.2 MIG Mode and select spool gun options.
Stick/MMA mode
Press main
menubutton.
Turn centre
selection knob
and select
Stickfunction.
Press centre
knobtoconrm.
Screen will show “NoGas
Required” .
Press centre
knob toconrm.
MIG mode for aluminium wire using standard MIG torch
To weld aluminium with a standard torch set up for aluminium,
please select MIG/MAG Manual mode.