Safety guidelines andprecautions
→ Repair or replace defective cables immediately.
→ Never watch the arc except through lenses of the correct shade.
→ In conned spaces, adequate ventilation and constant observation are essential.
→ Leads and cables should be kept clear of passageways.
→ Keep re extinguishing equipment at a handy location in theworkshop.
→ Keep primary terminals and live parts eectively covered.
→ Never strike an arc on any gas cylinder.
→ Never use oxygen for venting containers.
Symbol Explanation
Electrical safety alert
Welding electrode causing electric shock
Fumes and gases coming from welding process
Welding arc rays
Read instruction manual
Become trained
Symbol Explanation
Wear dry, insulated gloves
Insulate yourself from work and ground
Disconnect input power before working on equipment
Keep head out of fumes
Use forced ventilation or local exhaust to remove fumes
Use welding helmet with correct shade of lter
4
BOC Smootharc Multi 180/200 Operating manual
To Next Page
Loading...
