LOAD & CUT OPTO
Once a year the opto eyes should be blown off with air. This interval will vary depending upon the
environment and the quality of the ticket stock.
PLATEN (RUBBER DRIVER ROLLER)
See section 9.1.3 Platen (Rubber Driver Roller) of this user manual
CUTTER ASSEMBLY
See section 9.2 Cutter Assembly of this user manual
If you need additional help, please visit www.bocasystems.com/onlinesupportform.html
Click here to return to > Table of Contents
Blow out with air
in this area
To Next Page
Loading...
