34
11.9 Factory setting restoration menu
This menu can be used to reinstall the initial factory setting.
To go to this master clock menu, validate the option in the
technician menu with the key.
The following screen is displayed :
To reinstall the factory conguration, validate with the
key.
XII - Priority of execution of programs
Function Priority
Circuit 1 in alarm, circuits 2 and 3 in time distribution (D1D2 tower
clock)
1 (high)
Manual control of relays 2
Manual selection of a particular day (bank holiday / day before bank
holiday / special day)
3
Programmed special day 4
Programmed holidays and bank holidays 5
Weekly program 6 (low)
When the master clock is congured in one of the modes, all the program steps of the lower-
priority modes are ignored.
The “astronomical” and “periodic” modes, which are accessible only via software programming
on a PC, do not have high priority (the astronomical, periodic and weekly modes, which will
rarely be programmed together on the same circuit, are lumped together at low level).
Factory config. ok
õ
Restore config : No ú
factory configuration ok
To Next Page
Loading...
Need help?
General