Bodet Sigma C - Appendix II: Quick Start Guide

44
Appendix II : quick start guide
Enablinge/disablinge the circuit
- Press the key.
- The rst circuit will be displayed.
- Repeatedly press the key to select the desired circuit.
- The circuit mode will ash.
- Select the desired mode with the or key.
- Press the key to validate.
Start: enable circuit.
Stop: disable circuit.
Status: check circuit status.
Delete: erase existing schedule.
Prog: program schedule (create/modify/delete an event).
Display: scan existing schedule.
Test circuits
- Press the key.
- The rst circuit will be displayed.
- Repeatedly press the key to select the desired circuit.
- Press briefly the key to test shortly the circuit.
- Hold down the key to maintain the circuit activation and enter in the FORCED
TEST mode.
- Press briey the key to exit the FORCED TEST mode and deactivate the circuit.
Program a holiday or special day period
- Press the key.
- Select Holidays or Special day with the or key.
- Press the key.
- Enter the start and end dates and select application to all the circuits, the desired circuits
or all except the desired circuits.
To program several holiday periods, use the PC software provided with the master clock.
Access the user menu by pressing the key, to refer to the full record.
© 2017 BODET SA. All rights reserved.