18
P073GUI001 - e-Celsius Medical Connect System User Manual.4 - EN
"Storage temperature limit"
"Keep dry"
"Keep out of sunlight"
The label contains an IEC 60601-1 symbol:
"Follow directions for use" In addition, the label states:
"Medical device CE marked by the notied body NNNN"
"Do not dispose of the device with municipal waste" (> Precautions for use - page 6 )
NNNN
The label
The label contains the following symbols of the NF EN ISO 15223-1 standard:
"Serial number"
"Catalog reference"
"Manufacturer» + Year of manufacture (YYYY)"
AAAA
xxx
The battery
The activator does not include a battery. Each time it is used, the activator is powered from the mains
supply (IEC60601-1 or IEC62368-1 compliant power supply required) or from a switched-on PC/ MAC. The
connection between the activator and the mains power and/or the computer must only be made using the
cable supplied by the manufacturer.
Cleaning
Some applications will require to clean the activator. This is possible while respecting certain rules. It is
possible to clean your activator with a hydro-alcoholic gel wipe. However, it is essential to pay attention to
the outer connectors as they are the most sensitive to moisture.
The system must not be autoclaved under any circumstances, otherwise it will be permanently damaged.
Maintenance
It is strictly forbidden to open the activator. If a fault or malfunction is found, please contact your distributor
or BodyCAP (contact details at the end of the user manual).
IMPORTANT INFORMATION AND SAFETY INSTRUCTIONS
To Next Page
Loading...
