EM-RES-03 10/074
1 General safety and application information
This documentation has been created with greatest care and has been extensively and
repeatedly checked. For reasons of clarity, we have not been able to take all detailed
information on all the types of the products and also not every ima
ginable case of
positioning, operation or maintenance into account. If you require further information
or if particular problems not treated extensively enough in the operating instructions
occur, you can obtain the necessary information via the local representation of the
company BONFIGLIOLI.
In addition, we would point out that the contents of these operatin
g instructions are
not part of an earlier or existing agreement, assurance or legal relationship, nor are
they intended to amend them. All the manufacturer's obligations result from the pur-
chase contract in question, which also contains the completely and solely valid war-
ranty regulation. These contractual warranty provisions are neither extended nor lim-
ited by the implementation of these operating instructions.
he manufacturer reserves the ri
ht to correct or amend the contents and produc
information as well as omissions without specific announcement and assumes no kind
of liability for damage, injuries or expenditure to be put down to the aforementioned
reasons.
1.1 General information
Warning! BONFIGLIOLI VECTRON frequency inverters have high voltage levels dur-
in
operatin
, dependin
on their protection class, drive movin
parts and
have hot surfaces.
In the event of inadmissible removal of the necessary covers, improper
use, wron
g installation or operation, there is the risk of serious damage to
persons or property.
To avoid the damage, only qualified staff may carry out the transport,
installation, setup or maintenance work required. Comply with the stan-
dards EN 50178, IEC 60364 (Cenelec HD 384 or DIN VDE 0100),
IEC 60664-1 (Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) and na-
tional provisions. Qualified persons within the meaning of this principal
safety information are people acquainted with the erection, fitting, com-
missionin
g and operating of frequency inverters and the possible hazards
and in possession of qualifications matching their activities.