Bosch Access Modular Controller 2 Installation Manual

Access Modular Controller 2 Introduction | en 13
Bosch Security Systems B.V.
Installation manual
2021-04 | V04 | IM
Push Display (Example) Description
4 MAC 001B860012AB Network device address (MAC)
5 N AMC-1234-5678 Network name of the controller
See Configuring Ethernet interface, page 33
6 I 192.168.10.18 IP-address of the controller
7 G 192.168.10.255 IP-address of the gateway
(Version V 00.44 or higher)
8 M 255.255.255.0 Subnetmask
(Version V 00.44 or higher)
9 H 192.168.10.10 IP-address of the host computer
10 DHCP 1 DHCP-status:
1 = on
0 = off
11 D 192.168.10.1 IP-address of the DNS server
12 Host: + "C" Host activity:
+ = online
- = offline
"C" = Counter (0 to 9) of the received data
packages from the host interface.
RS 485 Bus connection:
A = Address 1 … H = Address 8
13 HSC state Host secure status:
1 = enable
2 = disable

Bosch Access Modular Controller 2 Specifications

General

Brand	Bosch
Model	Access Modular Controller 2
Category	Controller
Language	English