Bosch AVIOTEC 8000i IR - Page 7

AVIOTEC 8000i IR Safety instructions | en 7
Bosch Sicherheitssysteme GmbH
User manual
2023.10 | 02 | F.01U.414.168
i
Notice!
Make sure the camera is firmly mounted.
Camera shake might lead to non-detection. Avoid vibrations of the camera and the camera
environment.
i
Notice!
Influencing factor wind conditions
Strong air currents can cause false alarms by raising dust or debris similar in appearance to
fire and smoke.
!
Warning!
Bosch Security Systems assumes no liability for the reliability of fire detection in case of
configuration changes in Expert Mode. This means it is your responsibility to ensure the
reliability of the fire detection and, if necessary, fire tests.
i
Notice!
Avoid image regions with continuous upward motion.
Continuous upward motion might lead to false alarms.
i
Notice!
No detection in blinking light regions in the detection area.
i
Notice!
Make sure that the network performance is high enough to provide the video/live image to
an operator in sufficient quality for verification.
i
Notice!
The camera must be mounted horizontally. A twisted installation, e.g. 90° or 270° is not
permissible.
i
Notice!
The video-based fire detection system can only detect events within its field of view.
i
Notice!
Weather influences, such as fog, snow, rain, can adversely affect the detection
performance.