Flexible Automation
System modules
5-2
1070 072 143-101
Version
The following sections introduce all of the system modules which can be
used in the CL400. For each system module, the version given is the one
where application in the CL400 is possible. The version of a module is indi
cated by the marking of a number on the front panel.
1 2 3 4 5
6 7 8 9
X
3
1
V24/20mA
Version
Fig. 5-1 Version
The highest number marked is the version of this module. The example of
figs. 5-1 concerns version 3 of the module.
Slots
. Slot 8 of the subrack GG2/K must not be fitted with a system module,
since this slot is not sufficiently cooled by the fan unit.
GG2
1234567891011121314
Slots
Basic units
12345678
GG2/K
Fig. 5-2 System modules, slots
To Next Page
Loading...
