Bosch CL400 - NT1 and NT2 Modules

Flexible Automation
Power supply modules
3-8
1070 072 143-101
CAUTION 3.1
Danger to the module!
Do not insert or remove the module when the control is switched on!
This can destroy the module. Switch off or remove the power supply
module of the control, external power supply and signal voltage before
inserting or removing the module!
GG2
1234567891011121314
Slots
Basic units
12345678
GG2/K
Fig. 3-6 Power supply modules, slots
Ordering information
Designation Order no.
Power supply module NT1 1070 071 376
Power supply module NT2 1070 062 687
Power supply module NT3 1070 062 309
Power supply module NT24 1070 068 046
Buffer battery for NT1, NT2, NT3 and NT24 1070 914 447
Fig. 3-7 Power supply modules, ordering information
. The power supply modules in the basic unit do not supply the 24 V sup
ply voltage for the peripheral modules, transducers and actuators.
Power supplies for the 24 V supply voltage can be found in section 6.3
24 V load power supplies.