Flexible Automation
Power supply modules
3-10
1070 072 143-101
DANGER 3.2
Highly dangerous voltage!
Highly dangerous voltage is present at the input terminals of the power
supply modules NT1, NT2 and NT3!
Switch off the power to the terminals before working on the module!
CAUTION 3.3
Danger to the module!
Do not insert or remove the module when the control is switched on!
This can destroy the module. Switch off or remove the power supply
module of the control, external power supply and signal voltage before
inserting or removing the module!
CAUTION 3.4
Danger to the module!
All ESD protection measures must be observed when using the mo
dule! Avoid electrostatic discharges!
To Next Page
Loading...
