FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Networking via Ethernet | en 31
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
The check performed determines whether the Ethernet configuration from FSP-5000-RPS
corresponds to the configuration entered at the panel controller. In the event of
discrepancies, a fault message is displayed.
– Ethernet redundancy
Information concerning redundancy. The RSTP parameters of the RSTP panel and those
of the root bridge are displayed.
– Remote Services
Information concerning the features and the status of the Remote Services.
Further information can be found in
Network services, page 58
.
To Next Page
Loading...
