Bosch FPA-5000 - Blocking an element

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Fault message | en 49
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
10.4 Blocking an element
In order to block an element that has caused a fault:
1. Select the fault message you require.
2. Select Block.
!
Caution!
The system does not transmit any information as to whether it was possible to block the
selected element. To monitor the operation, check the element.