Bosch FPA-5000 - Table of Contents | en

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Table of contents | en 5
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
11.4.2 Via the status bar 51
11.5 Bypassing/Un-bypassing buzzer 51
11.6 Bypassing/Un-bypassing the output to fault warning routing equipment 52
11.6.1 Bypassing the output to fault warning routing equipment 52
11.6.2 Un-bypassing the output to fault warning routing equipment 52
12
Block 54
12.1 Menu overview 54
12.2 Blocking and unblocking elements 54
12.3 Displaying list of all blocked elements 54
12.3.1 Using the menu 54
12.3.2 Via the status bar 55
13
Diagnostics 56
13.1 Menu overview 56
13.2 Element details 56
13.3 Modules 57
13.4 Hardware 57
13.4.1 Display 57
13.4.2 CAN-Bus 58
13.5 Panel Passport 58
13.6 LED Test on modules 58
13.7 Network services 58
13.7.1 Routing table 58
13.7.2 Consistency check 59
13.7.3 Ethernet ports 59
13.7.4 Send ping command 60
13.7.5 Remote services 60
13.8 Voice alarm systems 61
14
Maintenance 63
14.1 Menu overview 63
14.2 Change language 63
14.3 Activate Outputs 63
14.4 Activate Transmission Device 64
14.5 Bypassing/Un-bypassing buzzer 64
15
Maintenance – walktest 65
15.1 Walktest groups 65
15.1.1 Adding or deleting elements 65
15.2 Starting and ending walktest 67
15.2.1 Starting the walktest 67
15.2.2 Ending the walktest 68
15.3 Ending walktest for all elements 68
15.4 Displaying tested or untested elements 68
15.5 Assigning tested elements to a walktest group 68
16
Maintenance – history log 69
16.1 Selecting filters 69
16.2 Setting filters 69
16.3 Change Filter 70
16.4 Combining several filters 70
16.5 Status bar functions 70
16.6 Printing out data 70