Bosch FPA-5000 - Page 4

4 en | Table of contents
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH
6.2 Diagnostics 30
7
Remote keypad 32
7.1 Operation and display 32
7.2 Connecting to remote panel 32
8
Alarm 34
8.1 Types of alarm 34
8.2 Entry delays 34
8.3 Day and night mode 35
8.4 Alarm message to the panel 36
8.4.1 Optical and acoustic signals 36
8.4.2 Displaying the detector zones in alarm state 36
8.4.3 Sequence of the alarm messages 37
8.4.4 Information about logical zones in the alarm state 37
8.4.5 The newest message 38
8.4.6 Displaying the individual detectors in a logical zone 38
8.4.7 Information about individual detectors 38
8.4.8 Displaying additional information 39
9
Fire alarm 40
9.1 Evacuation 40
9.2 Optical and acoustic signals 41
9.3 Acknowledging a message 41
9.4 Silence internal buzzer 41
9.5 Activate and silence signaling devices 41
9.6 Resetting signaling devices and transmission devices 41
9.7 Triggering fire verification 42
9.7.1 Alarm verification 42
9.7.2 Starting time to investigate 42
9.7.3 Triggering alarm manually 43
9.8 Resetting alarm message 43
9.9 Bypassing detectors 44
10
Fault message 45
10.1 Calling up fault indication 45
10.2 Fault message on the panel 45
10.2.1 Acknowledging a message 45
10.2.2 Sequence of the fault messages 46
10.2.3 Information about malfunctioning element groups 46
10.2.4 The newest message 46
10.2.5 Displaying individual elements of an element group 47
10.2.6 Information about individual elements 47
10.2.7 Displaying additional information 47
10.2.8 Signals 48
10.3 Resetting fault message 48
10.4 Blocking an element 49
11
Bypass 50
11.1 Menu overview 50
11.2 Bypassing and un-bypassing elements 50
11.3 Displaying and un-bypassing bypassed element groups 50
11.4 Displaying list of all bypassed elements 51
11.4.1 Using the menu 51