162/176 Diagnostics
Bosch Rexroth AG, MIT: ID 40, 3 842 530 344/2014-05
12.2 Diagnostics using the web interface
The SLK logs events and errors in what is known as a syslog buffer. This data buffer
can be read by a browser from System Diagnostics on the ID 40/SLK homepage and
saved to a syslog file. See also Chapter 10.5.8 “System log and settings page” and
10.6.2 “Directly retrieving the syslog”.
Export the syslog when the ID 40 experiences a system error and the actual cause
for a specific error indication is unclear.
The syslog file has to be sent to Service for further diagnostics and cannot be
interpreted by the user.
12.3 SLK software upgrade via serial interface
ID 40/KONF can be used to upgrade the SLK software by transferring a file with the
new software version to the SLK through the serial interface. The new operating
system becomes active after a restart.
The ID 40/KONF online manual describes how to do this.
Fig. 40:
SLK software upgrade with ID 40
PROOF COPY 1 | 20.05.2014 | FOR INTERNAL USE ONLY
To Next Page
Loading...
