EasyManua.ls Logo

Bosch Rexroth ID 40/SLK-CAN - Overview for ordering ID 40 modules; Mobile data tag; Read;write head; Fieldbus connection cable for SLK CANopen version

Bosch Rexroth ID 40/SLK-CAN
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
168/176 Overview for ordering ID 40 modules
Bosch Rexroth AG, MIT: ID 40, 3 842 530 344/2014-05
14 Overview for ordering ID 40 modules
Mobile data tag
2 kB memory capacity ID 40/MDT2K 3 842 406 150
8 kB memory capacity
Only available from Service, replaced by the ID 40/
MDT32K
ID 40/MDT8K 3 842 406 160
32 kB memory capacity ID 40/MDT32K 3 842 406 170
Read/write head
CANopen version ID 40/SLK-CAN 3 842 406 120
Profibus DP version ID 40/SLK-PDP 3 842 406 130
Interbus version ID 40/SLK-IBS 3 842 406 140
Fieldbus connection cable for SLK CANopen version
M12 plug, straight - open end, l = 3 m 3 842 406 121
M12 socket, straight - open end, l = 3 m 3 842 406 122
M12 plug, angled - open end, l = 3 m 3 842 406 123
M12 socket, angled - open end, l = 3 m 3 842 406 125
M12 plug, angled - M12 socket, angled, l = 3 m 3 842 406 152
Fieldbus connection cable for SLK Profibus DP ver-
sion
M12 plug, straight - open end, l = 3 m 3 842 406 131
M12 socket, straight - open end, l = 3 m 3 842 406 132
M12 plug, angled - open end, l = 3 m 3 842 406 133
M12 socket, angled - open end, l = 3 m 3 842 406 135
M12 plug, angled - M12 socket, angled, l = 3 m 3 842 406 153
Fieldbus connection cable for SLK Interbus version
M12 plug, straight - open end, l = 3 m 3 842 406 141
M12 socket, straight - open end, l = 3 m 3 842 406 142
M12 plug, angled - open end, l = 3 m 3 842 406 143
M12 socket, angled - open end, l = 3 m 3 842 406 145
M12 plug, angled - M12 socket, angled, l = 3 m 3 842 406 154
Fieldbus terminating resistor
CANopen 3 842 406 155
Profibus DP 3 842 406 156
Interbus terminating bridge 3 842 409 904
Accessories
RS232 diagnostics cable
(9-pin sub-D M12 round plug) 3 842 406 117
Configuration and diagnostics software pack ID 40/KONF 3 842 406 119
Function blocks for Siemens S7 controllers 3 842 406 190
Function blocks for Bosch CL and PCL controllers 3 842 406 191
PROOF COPY 1 | 20.05.2014 | FOR INTERNAL USE ONLY

Table of Contents

Related product manuals