Technical data 163/176
3 842 530 344/2014-05, MIT: ID 40, Bosch Rexroth AG
13 Technical data
ID 40
Type High performance no-contact identification
system
Static read/write distance Frontal MDT alignment: 2 – 12 mm
Lateral MDT alignment: 1 – 7 mm
Dynamic read/write distance Frontal MDT alignment: 2 – 10 mm
Lateral MDT alignment: 1 – 6 mm
Vmax for dynamically reading 64 bytes 30 m/min
Vmax for dynamically writing 64 bytes 30 m/min
SLK-MDT permissible height difference ± 5 mm
Certifications ETS 300 683, EN 300 330 CE 0678 !
ID 40/SLK read/write head
Housing dimensions Overall dimensions:
130 x 79 x 40 mm (H x W x D)
Installation in metal 10 mm clearance on all sides required
Operating temperature +5 °C to +55 °C
Storage temperature -20 °C to +85 °C
Protection class IP 65
Resistance to media On request
Status display Alphanumeric, 4-digit, red
Communication LED 1 color
Antenna position 90° forward, 0° upward
Connection type Insertable M12 connections for fieldbus, IDC
connector for 24 V power supply (black AS-i flat
cable)
Connectable to Profibus DP, CANopen, Interbus-S, RS232 (pa-
rameterization, diagnostics)
Power supply 24 V DC as per EN 61131-2
Current consumption Max. 350 mA
Weight of SLK Approx. 250 g
Mounting plate Approx. 150 g
ID 40/MDT mobile data tag
Type Readable/writable memory
Storage capacity Approx. 2 kB/8 kB/32 kB
Data organization Byte array, address-oriented
Reading/writing cycles Up to 10 trillion
Guaranteed data retention time 10 years (20 to 40 °C)
Housing dimensions 42 x 28 x 20 mm (H x W x D)
Installation in metal Flush
Storage temperature -25 °C to +85 °C
Operating temperature -25 °C to +70 °C
Protection class IP 68
Resistance to media Water, mineral oil, lubricating oil, brake fluid,
drilling water; more on request
Readability Readable from 3 sides
Status LED 2 colors (red, green)
Weight Approx. 50 g
PROOF COPY 1 | 20.05.2014 | FOR INTERNAL USE ONLY
ENGLISH
To Next Page
Loading...
