Table of contents
1
Introduction 9
1.1 About documentation 9
1.2 Bosch Security Systems, Inc. product manufacturing dates 9
2
System Overview 11
2.1 Product Matrix 11
2.2 Configuration and Parts 11
2.2.1 Control panel capacities 11
2.2.2 Parts list 12
2.2.3 Order separately 12
3
Installation workflow 13
4
Accessories 14
4.1 Codepads 14
4.1.1 Installer Menu 16
4.2 WE800EV2 receiver 18
4.3 HCT-4 keyfob 19
4.4 RADION receiver B810 19
4.5 RADION keyfobs 19
4.6 RADION repeater 20
4.7 RADION detectors 20
4.8 B308 Octo-output Module 20
4.9 B426/B426-M Conettix Ethernet Communication Modules 21
4.10 B450/B450-M Conettix Plug-in Communicator Interfaces 21
4.11 A-Link Plus Software 22
4.12 Remote Security Control 23
4.13 Remote Security Control Plus 23
4.14 Keyswitches 23
4.15 TF008 Plug Pack (TF008-B) 24
4.15.1 Install the transformer 24
4.16 DLA 24
5
Configuration 25
5.1 Installer Commands 25
5.1.1 Command 958 - Exit from Installer's Programming Mode without saving changes 25
5.1.2 Command 959 - Test IUI-SOL-ADAPTER 25
5.1.3 Command 960 - Save and exit from Installer's Programming Mode 26
5.1.4 Command 961 - Reset the Control Panel to Factory Default Settings 26
5.1.5 Command 962 - Copy the Control Panel Memory to IUI-SOL-ADAPTER 26
5.1.6 Command 963 - Copy IUI-SOL-ADAPTER data to the Control Panel 27
5.1.7 Command 965 - Set up Domestic Dialing Format 27
5.1.8 Command 966 - Enable/Disable the Automatic Stepping of Locations 28
5.1.9 Command 999 - Display the Control Panel Firmware Version Number 28
5.2 Disable Factory Defaults 29
6
System Operations 31
6.1 Arming the system in AWAY Mode 31
6.2 Disarming the system from AWAY Mode 31
6.3 Arming the System in STAY Mode 1 32
6.4 Disarming the system from STAY Mode 1 33
6.5 Arming the system from STAY Mode 2 33
Control Panel Table of Contents | en 3
Bosch Security Systems, Inc. Installation Guide 2017.10 | 03 | F.01U.298.026
To Next Page
Loading...
Need help?
General
