Bosch SOLUTION 6000 User Manual

27Bosch Security Systems 12/14 BLCC610U
Solution 6000 User Guide
Outputs > Commands >
Door Status
MENU 4-0-3
This menu allows the master user to view the status of a
selected door.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [0] + [3].
A list of available doors will display on the keypad.
Dr1 Front Door
Dr2 Computer Room
Dr3 Warehouse Door
Press
 OK or MENU
2. Use the [] and [] keys to select the door that you
want to check the status of, then press [OK] to select.
Alternatively, you can enter the door number then
press [OK].
The keypad will display the following:
Front Door Dr1
Door Locked
Press OK or MENU
3. The following door states can be displayed in the
door status menu.
Door Locked
Door Unlocked
Unlocked by TimeZone
Locked by TimeZone
Overridden Unlocked
Overridden Locked
4. When nished press [OK] or [MENU] to exit.
Outputs > Commands >
Door Array
MENU 4-0-4
This menu allows the master user to view the status of
doors on the system. Up to 16 doors are supported on this
system. Doors will continuously be updated during the
display so that real time status can be seen. The top two
rows of the display show the door number, the third row
displays the door status
L = Door Locked
U = Door Unlocked
O = Override
- = Disabled or Not Available
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [0] + [4]. The keypad will
display the following door array information for
doors 1 to 16.
0000000001111111
1234567890123456
LLLLL---UUUUO---
Press
 OK or MENU
In the above example screen,
L = Doors 01 to 05 are Locked
O = Door 13 has a Override condition
U = Doors 09 to 12 area Unlocked
- = Doors 06 to 08 and Doors 14 to 16 are Disabled or
Not Available
2. When nished press [OK] or [MENU] to exit.
Outputs > Commands >
Door Override
MENU 4-0-5
This menu allows the master user to override the current
state of the selected door.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [0] + [5].
A list of available doors will display on the keypad.
Dr1 Front Door
Dr2 Computer Room
Dr3 Warehouse Door
Press
 OK or MENU
2. Use the [] and [] keys to select the door that
you want to override, then press [OK] to select.
Alternatively, you can enter the door number then
press [OK].
The keypad will display the following:
Front Door Dr1
Door Override is OFF
To Turn ON, Press ON.
To Go Back Press OK
3. The following door states can be displayed in the
door status menu.
Door Locked
Door Unlocked
Unlocked by TimeZone
Locked by TimeZone
Overridden Unlocked
Overridden Locked
4. When nished press [OK] or [MENU] to exit.

Bosch SOLUTION 6000 Specifications

General

Partitions	8
System Type	Hybrid wired/wireless security system
Keypads	Up to 16
Communication	PSTN, optional IP module, optional GSM/GPRS module
Arming Modes	Stay, Away
Power Supply	16.5VAC
Backup Battery	12V 7Ah
Operating Temperature	0°C to +50°C