Need help?Do you have a question about the Bosch WBE 4140 and is the answer not in the manual?
General| Category | Industrial Equipment |
|---|---|
| Type | Welding machine |
| Mains voltage | 230 V |
| Rated input current | 16 A |
| Frequency | 50 Hz |
Explains warnings and symbols used within the documentation.
Details how warning notices are structured and their significance.
Lists and explains symbols used within the documentation.
Details symbols and warnings found directly on the machine.
Initial screen display and self-calibration procedure.
Explanation of the machine's control keys and their functions.
How to navigate through the machine's menu system.
Accessing and using the auto-diagnosis function.
Steps for performing calibration procedures.
Configuration options for machine settings.
Customizing user-specific settings and preferences.
How to access the calibration menu.
Procedure for calibration using wheel and weight.
Steps for calibrating the machine flange.
Calibrating measuring tools.
Performing a reference measurement for calibration.
Accessing the factory calibration menu.
Factory calibration using sample weight.
Factory flange calibration procedure.
Factory calibration of measuring tools.
Configuring factory settings for the machine.
How to access the machine diagnostics.
Information and checks related to pick-up sensors.
Testing the phase difference of pick-up signals.
Verifying the external pick-up sensor's function.
Verifying the internal pick-up sensor's function.
Function and troubleshooting of the encoder.
Diagnosing engine and power board issues.
Procedure to check transmission belt tension.
Overview and checking potentiometers.
Diagnosing the distance potentiometer.
Diagnosing the width potentiometer.
Diagnosing the diameter potentiometer.
Digital inputs and outputs of the machine.
Function and troubleshooting of the protection micro switch.
Steps to replace the pick-up sensor.
Procedure to replace the Aludata caliper.
Steps for positioning the width potentiometer.
Steps for positioning the diameter potentiometer.
Procedure for replacing the engine belt.
Steps to replace the power board.
Procedure for replacing the video board.
To Next Page