Boss BR-1600CD - Internal Connection Diagrams for each INPUT SELECT Condition; When [GUITAR;BASS] Is Selected

281
Operation of the INPUT SELECT buttons
Appendices
Internal connection diagrams for each INPUT SELECT condition
The internal connections for input audio signals change as described below in response to the current INPUT SELECT condition.
When [GUITAR/BASS] is selected
When the recording track is mono
fig.92-01
When the recording track is stereo
fig.92-02
Chorus/
Delay/
Doubling
LINE OUT
&
PHONES
L
R
Input 1
Pan
Reverb
INPUT
LEVEL
Insert
Effects
Recording track (mono)
GUITAR /
BASS
INPUT 1 /
MIC 1
INPUT
SENS 1
Impedance
Conversion
Input 1
Reverb Send
PEAK
Input 1
Chorus/
Delay/
Doubling Send
L
R
If an instrument is connected to the GUITAR/BASS jack, the
INPUT 1/MIC 1 jack will be deactivated.
Chorus/
Delay/
Doubling
LINE OUT
&
PHONES
L
R
Input 1
Pan
Reverb
INPUT
LEVEL
Insert
Effects
Recording track (even)
Recording track (odd)
GUITAR /
BASS
INPUT 1 /
MIC 1
INPUT
SENS 1
Impedance
Conversion
Input 1
Reverb Send
L
R
L
R
PEAK
Input 1
Chorus/
Delay/
Doubling Send
If an instrument is connected to the GUITAR/BASS jack, the
INPUT 1/MIC 1 jack will be deactivated.