BOYING PALADIN-V2 - Dynamic Balance Detection

To Next Page

To Previous Page

Flight control system user manual 󾗕Agriculture

The purpose of dynamic balance calibration is to adjust the speed di󽗈erence between the forward and

reverse motors and control it within the minimum range to ensure smooth 󽗊ight. Adjustment method:

After takeoff, hover in position holding mode, click to check motor balance, and after 30 seconds, the

average speed and di󽗈erence of the forward and reverse motors will be prompted. If the di󽗈erence is less

than 50, it indicates normal, and the direction that the motor needs to be corrected will be displayed in

the "Results" column.

Dynamic balance detection

When rotating the aircraft, rotate horizontally at a constant speed for 30 seconds on each axis. If the red light remains on

during rotation and calibration fails, please recalibrate.

1. Quickly toggle the "Mode Channel" switch more than 6 times, and when the status indicator light

󽗊ashes alternately red and blue, it indicates entering the magnetic compass horizontal calibration

mode;

2. Rotate the aircraft horizontally and smoothly 360 ° , wait for the green light to remain on, and

complete the horizontal calibration;

3. The aircraft head is vertically downward, waiting until the traffic lights cycle, indicating that it has

entered the vertical calibration mode of the magnetic compass;

4. Rotate the aircraft smoothly 360 ° again, wait for the status indicator light to stop 󽗊ashing and the

blue light to remain on, and the vertical calibration is completed;

5. After 3 seconds, the 󽗊ight control will automatically restart.