EasyManua.ls Logo

BrainBee MultiGas 8500 Plus - Page 11

BrainBee MultiGas 8500 Plus
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 11 / 77 CAP. 3 - SAFETY CONDITIONS
M
ULTIGAS
8
500 PLUS
HOSE CONNECTIONS: Hoses may contain pressurised refrigerant. Before changing the service
couplers, check the respective pressures in the hoses (pressure gauge).
Before connection to a car A/C system, to an external tank/vessel, check that the quick couplers
are closed (unscrewed HP and LP valves).
Scrupulously follow the instructions on the equipment's display.
QUICK COUPLERS CLOSING/OPENING:
h
ttp:/ /www .csa.it/sic urag ri/Seg nali/P erico lo-gen erico .gif
MAINTENANCE/GENERAL CLEANING: The equipment has to be serviced at the intervals
indicated by the equipment itself.
The service station maintenance has to be performed according to the procedures described in
this manual and to the current safety regulations.
Use only Brain Bee original parts.
When the equipment requires the dryer filter and the vacuum pump oil change, you have to be
careful in the replacement.
A/C service station maintenance can be carried out exclusively by a trained operator or by a
service man of a Brain Bee certified seller.
Do not use chemical agents for the service station cleaning as they could attack the material or
the surface.
Closing (detach from the vehicle):
counter-clockwise
Opening (connect to the vehicle):
clockwise

Table of Contents

Related product manuals