Branson F36r - Page 78

5
-
4
Branson F36R(H)/F42R(H)
2. Set the shuttle shift lever in the
neutral position. If not, the engine
won’t be started.
(1) Shuttle shift lever
A42O501A
3. Conrm that the PTO switch is set
in the OFF position. If not, the en-
gine won’t be started. Turn off the
PTO switch to the OFF position.
4. Check the position of the imple-
ment. Push the control lever for-
ward to lower the implement down
onto the ground.
(1) PTO ON/OFF switch (1) Hitch control lever
(A) Lowering (B) Lifting
A42O502A
A42O503A
[MEC. MODEL]
K3트랙터-유럽향(Branson 36R,42R))-영문-04 4 2016-01-27 오전 10:56:59