Braun Aesculap Acculan 4 - Operating Mode; Environmental Conditions; Disposal

15
en
12.3 Operating mode
Operation with non-periodic load and speed changes (type S9 pursuant to
IEC EN 60034-1)
Drilling (clockwise/counterclockwise rotation)
■ 60 second application, 60 second pause
■ 6 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Medullary reaming (clockwise/counterclockwise rotation)
■ 30 second application, 30 second pause
■ 8 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Drilling (oscillation)
■ 15 second application, 15 second pause
■ 3 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Saw mode with GB891R
■ 30 second application, 60 second pause
■ 4 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Saw mode with GB892R
■ 30 second application, 60 second pause
■ 5 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Screwing with GB896R/GB897R
■ 10 second mechanical application, 10 second manual application,
30 second pause
■ 30 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
12.4 Environmental conditions
13. Disposal
Note
The user institution is obliged to process the product before its disposal, see
Validated reprocessing procedure.
► Detailed information concerning the disposal of the product is avail-
able through your national B. Braun/Aesculap agency, see Technical
Service.
Operation Storage and transport
Temperature 10 °C to 27 °C -10 °C to 50 °C
Relative humidity 30 % to 75 % 10 % to 90 %
Atmospheric pressure 700 hPa to
1 060 hPa
500hPa to 1060hPa
Adhere to national regulations when disposing of or recy-
cling the product, its components and its packaging!
The recycling pass can be downloaded from the Extranet
as a PDF document under the respective article number.
(The recycling pass includes disassembling instructions
for the product, as well as information for proper disposal
of components harmful to the environment.)
Products carrying this symbol are subject to separate col-
lection of electrical and electronic devices. Within the
European Union, disposal is taken care of by the manufac-
turer as a free-of-charge service.