Engine ID: Indicates the SNMPv3 engine ID. The string must contain
an even number (in hexadecimal format) with number of digits
between 10 and 64, but all-zeros and all-F’s are not allowed. Change
of the Engine ID will clear all original local users.
Traps: This hyperlink provides quick access to the SNMP Trap
configuration page.
Figure 13: Trap Configuration Page
This page allows for the configuration of SNMP traps.
Mode: Enable/Disabled
Delete: Selecting this checkbox will delete the Trap Destination entry
once the “Save” button is click
Name: Indicates the trap Destination Configuration’s name
Enable: Indicates if that specific entry is either on or off
Destination Address: Indicates the SNMP trap destination address. It
displays an IP address in dotted decimal notation (1.1.1.1). It also
allows a valid hostname.
NOTE: A valid hostname is a string drawn from the alphabet (A-Za-z),
digits (0-9), dot (.), dash (-). Spaces are not allowed, the first character
must be in alpha character, and the first and last characters must not be a
dot or a dash.
To Next Page
Loading...