BridgeWave FLEX4G-LITE User Manual

6
FLEX4G-LITE
User Interface Manual
040-57105-01

BridgeWave FLEX4G-LITE Specifications

General

Modulation	QPSK
Power Supply	48 VDC
Ethernet Ports	1 x 10/100/1000Base-T
Operating Temperature	55°C
Encryption	AES-128

Summary

General Information

Introduction

Overview of the manual's content and purpose.

Safety and Regulatory

Covers general safety precautions and regulations.

RF Compatibility and Regulatory Information

Details FCC and EU compliance standards.

Std. Limited Warranty & SW License

Outlines hardware warranty and software license terms.

Product Description and Overview

FLEX4G-LITE Description

Describes the product's features, capabilities, and models.

Local Management Access

Connection to FLEX4G-LITE

Steps for connecting a PC to the device.

Radio Setup

Configuration panel for radio parameters.

Setting the Radio's IP Address

Guide to configuring network IP settings.

Detailed Status Page

Explains how to view system status and diagnostics.

Link Statistics Page

Details link performance error statistics.

Configuration Page

Accessing general configuration options.

Modem Firmware Upload Page

Procedure for uploading modem firmware.

Diagnostics Page

Tools for fault recovery and restart.

Security Page

Managing security features and licenses.

Logs Page

Reviewing system event and history logs.

FLEX4G-LITE – Switch Functions

Configuration

Details on configuring the switch.

Monitor

Tools for monitoring switch status and performance.

Maintenance

Operations for managing the switch like reboot and defaults.

UI & MODEM Update Procedures via CLI

Update Using Command Line Interface

Steps for updating via Telnet and TFTP.

Update FPGA/Modem Firmware

Procedure for updating FPGA/Modem firmware.

Updating UI using the GUI interface

Procedure for updating the UI via the web interface.

Updating FPGA/Modem Firmware using the GUI interface

Procedure for updating FPGA/Modem via GUI.