1 General Information
Introduction
This manual provides an overview and general introduction to the user
interface options of the FLEX4G-LITE millimeter wave radio. It contains the
information necessary to set up, operate, and maintain a link.
Bridgewave’s FLEX4G-LITE product family provides network designers with a
point-to-point broadband radio that delivers broadband wireless Ethernet IP-
based services.
Requiring no server room installation, the all-outdoor ready FLEX4G-LITE
installs quickly and delivers the lowest cost per gigabit wireless solution in the
industry. FLEX4G-LITE is the ideal choice wherever rapid deployment of
Carrier-grade Ethernet service is required.
The FLEX4G-LITE system consists of a radio unit and antenna.
Figure 1 illustrates a typical FLEX4G-LITE radio link.
Figure 1: FLEX4G-LITE Point to Point System
To Next Page
Loading...